Apple AppleVision 1710AV - Manual (Page 144)

User controls
m Power-on button
m Automatic degauss at power-up; manual degauss by turning power switch
off, then on (capable of full degauss after monitor is turned off for 20
minutes or more)
m Control buttons: Contrast, brightness, bass, treble, microphone on, volume,
mute, and three buttons for on-screen controls
m Additional picture and sound controls available using the AppleVision
Setup control panel (Macintosh users) or on-screen controls (IBM
PC-compatible users)
Active video image area
m Adjusted at the factory for the following standard modes:
Mode Resolution Vertical refresh rate Horizontal scan rate
(hertz) (kilohertz)
VGA 640 x 480 60 31.5
Macintosh 640 x 480 66.67 34.97
VESA 800 x 600 60.31 37.9
VESA 800 x 600 75 46.9
Macintosh 832 x 624 74.55 49.7
Macintosh 1024 x 768 74.93 60.24
VESA 1024 x 768 60 48.4
VESA 1280 x 1024 60 64.3
VESA 1280 x 1024 75.03 79.98
Audio input signals
m Accepts audio signal of up to 4 Vpp (line level–low sensitivity) or as low
as 20 mVpp (microphone level–high sensitivity) without clipping the
signal, depending upon the level and sensitivity setting
Microphone
m Directional, optimized for use in speech recognition and other voice-
related application programs
146 Appendix B