Apple AppleVision 1710AV - Manual (Page 50)

2 Click the Geometry button.
The Geometry window appears.
3 Click the Convergence button.
The Convergence Control window appears and your screen background
changes to show a grid of red, green, and blue signals. When convergence is
set properly, the signals in the grid are aligned vertically and horizontally.
IMPORTANT When you adjust convergence, refer to the grid outside the
Convergence Control window, not the picture of the grid inside the window.
36 Chapter 3
Click to move the red signal down
and the blue signal up.
Click to move the red signal up
and the blue signal down.
Click to move the red
signal to the left and
the blue signal
to the right. Click to move the red signal to the right
and the blue signal to the left.
Click to adjust
convergence.