Apple AppleVision 1710AV - Manual (Page 41)

Using more than one display
When you open the AppleVision Setup control panel, the name of your
display appears near the top of the control panel. If you have more than one
display attached to your computer, a control panel appears on each display
that supports the AppleVision Setup software.
For example, if you have an AppleVision 1710 AV Display and an AudioVision
14 Display attached to your computer, an AppleVision Setup control panel
appears on each display and the name of the display is listed near the top of
the panel. Changes you make in a control panel apply only to the display
listed near the top of the panel.
If you have an AppleVision 1710 AV Display and another display that doesn’t
support the AppleVision Setup software, the control panel only appears on the
AppleVision 1710
AV Display.
Adjusting the screen image
If you change your screen resolution, you may need to adjust the image on
your display.
Adjusting contrast and brightness
Use the Display window in the AppleVision Setup control panel to adjust
contrast and brightness.
1 Press a Control button on the front of your display (or open the AppleVision Setup
control panel from the Apple [
K
] menu).
The AppleVision Setup control panel appears.
2 Click the Display button.
27 Adjusting the Screen Image