IKA C 6000 isoperibol Package 2/12 - Manual (Page 21)

21
Switching off the device
I
First commissioning
At fi rst commissioning you must register a de-
composition vessel:
To do this, press „Menu on“ button.
Select the „Function...“ menu item.
Select the „New decomposition vessel“ tab.
Follow the instructions on page 37.
If the cooling water conditions are not correct for
the selected function of the IKA
® C 6000 global
standards/isoperibol, you can select a different
function from those currently available. Make sure
however that the system conditions are stable.
The following are the default modes that are set:
- Adiabat 22
(IKA ® C 6000 global standards)
- Isoperibol 22 (IKA ® C 6000 isoperibol)
If the system is changed to a different function it
must be recalibrated.
„End“: This saves the measurements taken du-
ring the day; the cover of the calorimeter is
closed and the software shut down. After this,
switch off the calorimeter and all the accessories.
Never switch the device off without pre-
viously having run „End“, otherwise data
may be lost!
Working with the IKA ® C 6000 global standards/isoperibol calorimeter