IKA C 6000 isoperibol Package 2/12 - Manual (Page 8)

8
Transport and storage
Transport and storage conditions
The system must be protected against mechanical
impact, vibrations, dust deposits and corrosive
ambient air during transportation and storage. It is
also important to ensure that the relative humidity
does not exceed 80%.
The appliance must be completely emptied before
storing and transportation.
In case of repair the device has to be cleaned and
free from any materials which may constitute a
health hazard.
For this use the „certifi cate of compliance“, down-
load the form from the IKA
® website www.ika.
com.
If you require servicing, return the appliance in its
original packaging. Storage packaging is not suffi
cient. Please also use suitable transport packaging.
In accordance with IKA ® warranty conditions, the
warranty period is 12 months. For claims under
the warranty please contact your local dealer. You
may also send the machine direct to our factory,
enclosing the delivery invoice and giving reasons
for the claim. You will be liable for freight costs.
The warranty does not cover worn out parts, nor
does it apply to faults resulting from improper use,
insuffi cient care or maintenance not carried out in
accordance with the instructions in this operating
manual.
Please read these operating instructions carefully.
IKA ® only consider themselves to be responsible
for the safety, reliability and performance of the
appliance when
• the appliance has been operated in accordance
with the operating instructions,
• only persons authorised by the manufacturer
interfere with the appliance,
• only original parts and original accessories are
used for repairs.
The calorimeter system may be opened only by
an authorised Service Agent or Customer Service
Centre.
If service is required, we recommend that you
contact our customer service department
Furthermore, we refer you to the applicable safety
conditions and accident requirements.
IKA
® is not responsible for damages or costs
resulting from accident, improper use of the
device or impermissible modifi cations, repairs or
renovations.
Warranty and liability
• Operating mode based on the adiabatic,
isoperibolic or dynamic principle at 22 °C, 25
°C or 30 °C (the beginning temperature of the
water in the inner vessel) depending on the
cooling water temperature.
Differences between the room temperature
and working temperature have an infl uence on
accuracy in dynamic mode; as a result, the working
temperature should always be kept similar to the
room temperature.
Cooling water Mode of operation Mode of operation
temperature C 6000 global standards C 6000 isoperibol
12 °C bis 20 °C Adiabatic 22 °C -
Isoperibolic 22 °C Isoperibolic 22 °C
Dynamic 22 °C Dynamic 22 °C
20 °C bis 23 °C Adiabatic 25 °C -
Isoperibolic 25 °C Isoperibolic 25 °C
Dynamic 25 °C Dynamic 25 °C
23 °C bis 27 °C Adiabatic 30 °C -
Isoperibolic 30 °C Isoperibolic 30 °C
Dynamic 30 °C Dynamic 30 °C
User instructions