IKA C 6000 isoperibol Package 2/12 - Manual (Page 36)

36
„Calibration“ tab
You can select each calibration individually and
click on the „Select“ button, or double click on
the calibration to reference this calibration in the
calculation of the C mean value (or to exclude it
if it had previously been selected). Then switch to
the „Statistics“ tab.
„Statistics“ tab
Average value, standard deviation and maximum
deviation relate to the calibration selected. Click
on the button „Load“ to load the average value
of the calibrations as the new C value.
You can also press the „Set“ button to input the
new C value manually. Press the „Confi rm“ but-
ton to load the value.
Press the „Print statistics“ button to print the
complete statistics on a connected printer. Press
the „Delete statistics“ button to delete the selec-
tion from the statistics that are referred to during
calibration.
Click on the „Save“ button, to use all the chan-
ges for the selected decomposition vessel and
the selected function. If you click on the „Undo“
button, you can completely undo these changes.
If you press „Done“ you save the inputs, exit this
menu, and revert to the overview of the measu-
rements.
If you press „Save“ you remain in this menu and
can select other actions (such as „Check chart“).
Menu
If you wish to change the function for subsequent
measurements, click on the „Change“ button to
start the system check for the new function.
Alternatively you can select a decomposition ves-
sel from the updated list of decomposition ves-
sels.