JLG 1850SJ Service Manual - Manual (Page 368)

SECTION 7 - BASIC ELECTRICAL INFORMATION & ELECTRICAL SCHEMATICS
7-8 – JLG Lift – 3121619
3. After all required contacts have been inserted, the
wedge lock must be closed to its locked position.
Release the locking latches by squeezing them inward
(See Figure 7-10.). 4. Slide the wedge lock into the housing until it is flush
with the housing (See Figure 7-11.).
Figure 7-9. Connector Assembly Figure 2
Figure 7-10. Connector Assembly Figure 3
Figure 7-11. Connector Assembly Figure 4