JLG 1850SJ Service Manual - Manual (Page 61)

SECTION 3 - CHASSIS & TURNTABLE
3121619 – JLG Lift – 3-19
9. Install Spring (35) and Coupling (34).
10. Install O-Ring (26). Install Planetary Ring (18) with two
Screws (19). Torque Screws to 36.8 ft-lb (50 Nm).
11. Install Gear Reduction Assembly (16), Gear Reduction
Assembly (13), and Pinion (11) in Planetary Housing.
Lubricate all bearings.
12. Install O-Ring (7) and O-Ring (10) in Cover (6). Liberally
coat Spacer (8) with grease and center on hole at center
of Cover. Install Cover on Planetary Ring Assembly (18)
and secure with Ring (1). Replace Gasket (4) as needed.
34
35
18
19
26
11
13
16
1
6
10
4
8
18
7