JLG X19J Operator Manual User Manual
Page 100
6.5.7 EMERGENCY OPERATION OF THE UNDERCARRIAGE IN THE EVENT OF
MOVEMENTS OF THE AERIAL PART
During transport, the aerial part of the machine may turn, con‑
sequently becoming misaligned.
If this occurs, one of the two EMERGENCY PROCEDURES
described below can be applied.
A)
Machine realignment:
‑
Open the electrical components compartment.
‑
Place the emergency key on the electrical components
compartment, removing it from the machine’s key holder,
where it is sealed with lead (see photo).
‑
Turn the emergency key anticlockwise and hold it in posi‑
tion (see sticker).
The display on the remote control shows the
safety device BYPASS icon.
‑
Realign the machine, controlling it from the basket by means of the remote control.
P
ERFORM EXCLUSIVELY THE ROTATION MANOEUVRE
‑
Once the machine has been aligned, release the key, remove it, put it back in its original posi‑
BOOM LIFT MODELS X19J
JLG
96
X19JR0620113
T
HE MANOEUVRE DESCRIBED BELOW MUST BE CARRIED OUT ONLY AND EXCLUSIVELY WITH THE
MACHINE CLOSED
.