JLG X19J Operator Manual User Manual
Page 113
•
Fluid that leaks under pressure may penetrate the skin. Always discharge pressure befo‑
re removing the hydraulic hoses and tighten connections correctly before pressurising.
Keep hands and body away from small holes and nozzles where high‑pressure liquids
may be released. Use cardboard or paper to identify leaks.
Heavy parts must be lifted using a lifting device with suitable capacity.
•
It is prohibited to carry out any maintenance operations with the working arm not com‑
pletely lowered and/or with stabilised machine.
•
If operations are being carried out, apply a visible sign on the start panel, stating “DAN‑
GER. Do not move the machine, service in progress”.
7.6 OPERATING THE MACHINE FROM THE SECOND CONTROL POSITION ON THE
GROUND USING THE OPTIONAL SECOND REMOTE CONTROL DURING MAINTE‑
NANCE
This type of operation is only allowed in the event of maintenance on the machine by expert
personnel.
For the controls from the ground position with the optional second remote control, see the
corresponding paragraph.
‑
Stop the machine, key in the OFF position.
‑
Take the key to enable emergency descent from the group of keys inside the electrical
components compartment.
‑ Insert the key in the control panel on the emergency control position and select the
remote control on the ground.
‑
Connect the optional second remote control following the procedure specified in the
corresponding paragraph (make sure the contacts of the connectors on the remote con‑
trol and the machine are completely dry).
‑
Start the machine, key in the ON position.
‑
Check that the icons are correctly shown on the display on the remote control in the
ground position.
‑
Move the aerial part of the machine using the remote control from the ground, fol‑
lowing the instructions given in the paragraphs regarding the operation of the machine.
If the load in the basket exceeds 50 kg, to use the remote control from the ground hold
button 8 and then activate the required movement.
109
BOOM LIFT MODELS X19J
JLG
X19JR0620113
IMPORTANTE
IMPORTANT