JLG X19J Operator Manual - Manual (Page 102)

6.6 ELECTRICAL DISCONNECTION OF THE REMOTE CONTROL
The electrical disconnection/connection of the remote control MUST be carried out exclu‑
sively with the motor key in position OFF and with the mains power disconnected.
• Disconnect the cable from the remote control using the corresponding screw connection.
• Make sure there is no moisture in the remote control connector and close the remote
control sealing plug.
• Make sure there is no moisture in the electric cable connector and close the electric cable
sealing plug.
NOTE: both connectors must be closed with the respective sealing plugs to prevent moisture
from entering.
To reconnect the remote control, follow the same process in the reverse order.
X19JR0620113 98
BOOM LIFT MODELS X19J
JLG