JLG X19J Operator Manual - Manual (Page 80)

After the conditions described above have been checked, make sure there are no obstacles in
the working area of the jib arm, and proceed as follows:
‑
Use joystick 6 to move the jib arm. If another joystick is used, an error message will be
shown on the display:
‑ AFTER PASSING THE INCLINE THAT REQUIRED THE JIB ARM TO BE OPENED,
RETURN THE MACHINE TO THE CLOSED CONFIGURATION TO CONTINUE
TRAVELLING.
‑ With the jib arm raised always travel at minimum speed and keep the jib arm as close to
the ground as possible.
‑ DO NOT travel downhill if the jib arm is not completely folded.
X19JR0620113 76
BOOM LIFT MODELS X19J
JLG