JLG X19J Operator Manual - Manual (Page 45)

mode.
When the maximum allowable load is reached, an icon appears on the remote control
display, a sound signal is emitted and all platform movements are disabled.
To restore platform operation the excess weight must be removed in order to return below
the maximum allowable weight (see paragraph on the display).
The Constructor recommends that maximum attention is paid
to the conditions of all safety components and in particular of
the system that makes up the basket load sensor; always check
correct operation whenever objects are struck with the basket or
if performing operations that may damage the system (e.g. pru‑
ning, painting etc.).
Before any elevating manoeuvre, always make sure that the two closing covers on the ver‑
tical pins are completely screwed in.
3.8 CONTROL PROTECTION
A protection structure is provided to protect the remote
control against the accidental fall of objects from above
and involuntary activation by the operator.
Always make sure that this protection structure is intact
before using the machine.
3.9 SPIRIT LEVEL
The spirit level is positioned on the turret and it is readily visible
from the basket and from the ground. The spirit level must be
used to make sure that during the platform levelling phase the
maximum allowable gradient of 1° is complied with. This condi‑
tion is met when the air bubble is inside the green area.
A second electronic spirit level contained in the control board
makes sure that this condition is effectively satisfied and checks
the power supply to the controls for the aerial part.
ATTENZIONE
PERICOLO
COVER
X19JR0620113
BOOM LIFT MODELS X19J
JLG
41
WARNING
DANGER