1 before you start, Product completeness check, Connector lay-out – 2N VoiceBlue MAX v1.5 User Manual
Page 10

10
2.1 Before You Start
Product Completeness Check
Before installing this product, check whether the
delivery
2N VoiceBlue MAX
®
complies with the following packing list.
Package
pcs
2N VoiceBlue MAX
®
1
Power supply adapter
1
Long antenna
1
Ethernet cable
1
Quick Start manual
1
Rubber feet
4
Connector Lay-Out
The following connectors are mounted on the
bottom:
2N VoiceBlue MAX
®
10/100BaseT Ethernet connector
4xFXS connector RJ-45
RESET button – press for a short time to restart the GSM gateway and for a long
time to restart the GSM gateway and download the factory settings.
Antenna connector for all GSM/UMTS channels
SIM holder
Find a power supply connector (DC Jack 2.1mm) and type plates at the rear.
Caution
Make sure that you are equipped with all system components necessary
for putting
in operation (SIM card, VoIP phone
2N VoiceBlue MAX
®
and/or duly configured SIP line of your SIP Proxy, an available 100BaseT
socket and a PC for initial settings, analogue telephone).