Users – 2N VoiceBlue MAX v1.5 User Manual

Page 63

Advertising
background image

63

2N TELEKOMUNIKACE a.s., www.2n.cz

®

Users

This section helps you manage the SMS users. Select a communication protocol for
user adding (SMTP/POP3 or SMPP).

Add user

– assign the user to a User group.

User group

– define the system user name.

User full name

– define the number (CPN) to which the user's

Replace dial for outgoing SMS
outgoing SMS messages shall be sent.

– select the communication protocol for SMS processing:

Access type

– define the login name for the client Email.

Login name (without domain)

Email (SMTP/POP3)

use SMTP for SMS sending and POP3 for SMS

receiving.

– set the GSM gateway into the 'SMS centre' mode.

SMPP (SMSC)

– set the GSM gateway into the 'ESME - External Short

SMPP (ESME)
Messaging Entity' mode.

– SMSC user ID.

System ID

– SMSC/SMTP user password.

Password

– ESME user ID.

System ID (for authentication on remote side)

– ESME user ID.

Password (for authentication on remote side)

– set the TCP parameter into the client/server mode.

TCP type

– set the server IP address and TCP server transport port.

Server address

– set the ESME user details:

Message direction of Esme

Transceiver

– ESME works as a transmistter/receiver.

– ESME works as a transmitter.

Transmitter

– ESME works as a receiver.

Receiver

Address range

set this parameter if required so by SMSC for SMS receiving

.

Delivery status required – set the SMS sending request for outgoing SMS
delivery confirmation

.

Send message as Flash SMS activate the Flash SMS function for outgoing

SMS messages.

Caution

The count of user accounts is file-licensed. Refer to Management

for the current GSM gateway licence details.

Licence key

Note

You can set the

parameter only if the

Delivery status required

SMTP/POP3 protocol is used.

With SMPP, the delivery information is active automatically in case the
service is required by the SMPP counterparty or via an incoming SMS
message from the GSM/UMTS network.

The user count is licence–limited. The highest possible count of licensed
users is 200. Refer to

for the current GSM

Management Licence key

gateway licence details.

Advertising