2N VoiceBlue MAX v1.5 - Manual (Page 42)

42
2N TELEKOMUNIKACE a.s., www.2n.cz
®
LOG file
The LOG file window helps read out the gateway LOG file. The bottom part of the
window includes icons for saving the LOG file into a file and refreshing the LOG listing
in the web window.
Refer to for more details. Subs. 4.3
CDR File
The CDR file window helps read out the Call Data Records (CDR) of the gateway. The
bottom part of the window includes icons for saving the CDR into a file and refreshing
the CDR listing in the web window. Refer to Subs.
for more 4.4 CDR line description
details on the CDR format.
SDR File
The SDR file window helps read out the SMS Data Records (SDR) of the gateway. The
bottom part of the window includes icons for saving the SDR into a file and refreshing
the SDR listing in the web window. Refer to Subs.
for more 4.5 SDR line description
details on the SDR format.
Note
Voice messages with indexes 30 – 37 are used for detection of the mobile
provider's voice message played before call connection. If a match is
found of the voice message with any of the voice messages recorded in
the gateway, the call is terminated automatically or established via the
last GSM outgoing group set in the LCR table (on condition that the ITD –
Ignore tone detection in last group parameter is active) in the Gateway
section. Refer to the Configuration LCR table Gateway Configuration
for details. GSM basic parameters Voice message detector settings
Caution
The maximum capacity is 100,000 call records. When this limit is reached,
the oldest record(s) will be deleted automatically!
The latest 1,000 call records are displayed in the web interface.
Downloading of a high amount of CDR may take up to several tens of
seconds.