Lcr table, Correct me configuration – 2N VoiceBlue MAX v1.5 User Manual
Page 33
33
Figure 4: Quick Call Forwarding Function
Correct ME configuration:
Connect the GSM gateway to your PBX/SIP Proxy.
Check whether the
licence key has been entered
2N
Mobility Extension
®
correctly.
Enter all ME users in the
menu.
Gateway configuration / Mobility Extension
Enter the prefix matching the ME user mobile number in the Gateway
menu.
configuration
prefixes
/
LCR Table
The LCR (Least Cost Routing) table is the key telephone cost cutting tool. It helps you
select call routes according to the called subscriber’s number, daytime and weekdays.
By adding bank holidays (with routing rules as on Sundays) to the LCR table you
achieve even higher call cost savings.
To make your prefix and LCR routing work properly, enter the prefix of the number to
be called to the GSM/UMTS network into the
in the
Table of accepted prefixes
menu. The number to be called may not exceed
Gateway configuration
Prefixes
/
the
or the higher priority
setting in the
Default count of digits
Count of digits
Table
. The table is searched from top to bottom starting with the first
of accepted prefixes
match.
Apply the
to modify the number to be called to the
Table of replaced prefixes
GSM/UMTS network. Every modification is displayed in the
f
"prefix"/"replace with"
ormat (99/+420, e.g.). The
must always contain one
Table of replaced prefixes
record at least or the
record if no prefix modification is made. The digits removed
"/"
from/added to the number in the
are not included in the
Table of replaced prefixes
. The table is searched from top to bottom starting with the first
Count of digits
match.
GSM network ID is an optional parameter, which is assigned to each LCR record to
make the LCR search more convenient. If this parameter is not completed, the list
number is only used for identification (1-8).