2N VoiceBlue MAX v1.5 - Manual (Page 28)

28
2N TELEKOMUNIKACE a.s., www.2n.cz
®
3.1 Factory Reset
If you forget the password or set the IP interface incorrectly, you can press the RESET
button placed on back side of the gateway (next to power connector).
Doing this, you restore the factory default configuration values for all parameters,
including the Ethernet interface parameters and access data. Refer to
for Subs. 2.2
factory settings.
Caution
Resetting the factory configuration values results in changes of the
Ethernet settings and subsequent necessity to reconfigure the gateway.
Note
Push the RESET button for a short time (0.5 s) to restart the GSM
gateway.