5 2n® voiceblue max connection to voip, Sip/h.323 interconnection, Point-to-point configuration – 2N VoiceBlue MAX v1.5 User Manual

Page 24

Advertising
background image

24

2N TELEKOMUNIKACE a.s., www.2n.cz

®

2.5 2N® VoiceBlue MAX Connection to VoIP

Since

communicates using the SIP only, this subsection outlines

2N VoiceBlue MAX

®

solutions for its interconnection with networks working with the H.323 signalling
protocols.

can be used either in the Point-to-Point or

2N VoiceBlue MAX

®

Point-to-Multipoint mode with the SIP Proxy server.

SIP/H.323 Interconnection

SIP-based devices cannot communicate with H.323.supporting devices directly, but
through a SIP/H.323 gateway. This gateway transfers signalling messages from/to the
protocols. Using the RTP for multimedia data transmission, the SIP and H.323 protocols
can go on communicating directly when the SIP/H.323 gateway connection is
established. Thus, the SIP/H.323 gateway helps integrate

into

2N VoiceBlue MAX

®

the existing H.323 environment.

Point-to-Point Configuration

2N VoiceBlue MAX

®

can communicate with just one SIP VoIP phone or device (a VoIP

gateway, e.g.) in the PTP (Point-to-Point) mode. The IP address of the opposite party is
always selected as the Proxy server IP address in

for this mode.

2N VoiceBlue MAX

®

The

PTP configuration is often used for testing purposes before

2N VoiceBlue MAX

®

implementation into the VoIP network. Refer to the figure below for the PTP scheme.

Tip

If you set the incoming SIP Proxy IP address to '0.0.0.0' in the 2N

®

configuration, the GSM gateway will receive calls from

VoiceBlue MAX
any VoIP device.

Advertising