Power supply connection – 2N VoiceBlue MAX v1.5 User Manual
Page 18
18
2.
3. Place the GSM gateway pair into a free 1U place in the system rack and fit it with
four rack screws (included in the package).
Power Supply Connection
Use only the power supply adapter included. Make sure that the electric distribution
network voltage is in compliance with the data on the supply adapter plate before
plugging the adapter. First plug the supply adapter into the mains socket and
only then
connect the adapter connector to the gateway. Refer to the status indicators.
Caution
The rear and upper connecting plates have different holes – the upper
plate holes are larger and without threading.
Make sure that the plate does not get into the device to avoid electric
short-circuit inside the GSM gateway.
Leave 2 cm free space at least over and under the GSM gateway for
better ventilation (airflow)!