APG MND user manual - Manual (Page 19)

Rev. A1, 5/14 MND
19
Automation Products Group, Inc.
APG...Providing tailored solutions for measurement applications
Tel: 1/888/525-7300 • Fax: 1/435/753-7490 • www.apgsensors.com • [email protected]
WRITE
: allows the MND, opera ng in Master mode, to write a value to a specifi c
holding register of a specifi c sensor. When Write is selected, the MND will guide you
through the following steps:
Sensor Address: set the address number of the target sensor.
Register Number: set the register number you wish to change.
Register Type: set the type of register being wri en (16-bit or 32-bit).
Register Value: set the value you want to write to the selected register.
Write Yes/No: select Yes to write the new register value and complete the
procedure, or No to cancel the write, and return to the Communica ons menu.
Write func on example: changing the Empty Distance value (register 40407) to 2150
in sensor address number 5.
Sensor Address: 05
Register Number: 407
Register Type: U16 (unsigned 16-bit).
Register Value: 02150
Write Yes/No: select Yes by pressing Enter.
AdRCHG
(Address Change): allows the user to quickly change a sensor’s address when
the MND is opera ng as the Master device. Simply enter the current address of sensor
you wish to change (NOW), then enter the new address you wish to write to the sensor
(NEW).