APG MND user manual - Manual (Page 23)

Rev. A1, 5/14 MND
23
Automation Products Group, Inc.
APG...Providing tailored solutions for measurement applications
Tel: 1/888/525-7300 • Fax: 1/435/753-7490 • www.apgsensors.com • [email protected]
Step 5: Check the USB Communica on
box when using an RST-6001 RS-485 to
USB converter.
or
Select the Com Port assigned to the
RS-485 to RS-232 converter being used.
Step 7: Select MND
Step 6: Ensure Sensor #
matches the Sensor Address
se ng in the MND.
Step 8: Once all the changes have been
made, click “Save Confi g” then click “Close”
Step 9: Click on “Sensor 1 “ to enter the
programming window for the MND.
(con nued on next page)