APG MND user manual - Manual (Page 28)

MND Rev. A1, 5/14
28
Automation Products Group, Inc.
APG...Providing tailored solutions for measurement applications
Tel: 1/888/525-7300 • Fax: 1/435/753-7490 • www.apgsensors.com • [email protected]
Specifi cations
Environmental:
Housing: IP67
Storage Temp: -40 to 160 0 F (-40 to 71 0 C)
Operating Temp: 0 to 160 0 F (-18 to 71 0 C)
Electrical:
Batteries: 9 V Lithium or 3.6 V Lithium (no outputs)
External Power: 9-28 Vdc
Physical:
Case Material: injection molded material EMI-X PDX-W-88341
4-20 mA Output:
Input Voltage Requirements: 9 Vdc min (no load) to 28 Vdc max
Signal Variance: +/-0.16 mA at set points
Output/Input: 2-wire loop-powered
Resolution: 14 bit
Protection: reversed polarity
0-5 VDC Output:
Input Voltage Requirements: 9 to 28 VDC
Signal Variance: +/-0.05 VDC at set points
Type: non-isolated 3-wire
Resolution: 1 4 bit
Protection: reversed polarity
Trip Point Solid State Relay Outputs:
Maximum Switched Voltage: 120 V AC/DC
Maximum Switched Current: 120 mA