Atop Technology EH7510 User manual - Manual (Page 106)

Atop Industrial Managed Ethernet Switch
EH7510
User Manual V 1.0
100
Chapter 4: SwitchView & Topolog Diagram
SwitchView and Topolog Diagram are interfaces developed by Atop Technology; instead of
providing detailed descriptions for a specific device, SwitchView and Topolog Diagram have
information for all devices in the network. SwitchView allows users to locate, upgrade, or
reboot devices, and Topolog Diagram shows how all managed switches in the network are
connected; this chapter illustrates how these two tools can be used effectively.
4.1 SwitchView
SwitchView shows Model name, IP address, MAC address and other information of devices
in the network; the window is shown below.
Fig. 4.1
Table 4.1
Label/Icons Description
Search devices again with current search condition.
Ping a device in the network.
Configure network settings.
Locate a device. Device beeps if selected.
Open a web browser for configuration for selected device.
Upgrade application of kernel firmware version from local disk.
Open Telnet for configuration for selected device.
Open “Topology Diagram” utility to see the switches topology.