Atop Technology EH7510 User manual - Manual (Page 92)

Atop Industrial Managed Ethernet Switch
EH7510
User Manual V 1.0
86
Users will have the following result for a failed ping.
Fig. 2.75.d
*Note:
If users assign domain name instead of IP address, they should assign DNS* first. This can
be done through Administration > IP Settings . An example is shown below.
Fig. 2.76
2.17 System Log
This function contains two pages, Syslog and Event Log.
2.17.1 Syslog
Fig. 2.77
Fig. 2.77 shows Syslog related settings configuration. The actual log event recorded will be
showed in Event Log on next page.