Atop Technology EH7510 User manual - Manual (Page 90)

Atop Industrial Managed Ethernet Switch
EH7510
User Manual V 1.0
84
Fig. 2.74.b
Table 2.56
Label Description
Factory
Default
SMTP Server Address Configure the IP address of email server NULL
Sender E-mail Address Configure the sender e-mail address. NULL
Mail Subject
Type the subject of this warning message.
Max. 31 characters.
NULL
Authentication
Enable or disable authentication login.
If enabled, server will need authentication to
login; users will also need to setup username
and password.
Checked
Username
Set the user name (or account name) to login.
Max. 31 characters.
NULL
Password
Set the account password for login.
Max. 15 characters.
NULL
Recipient E-mail Address
1
Set the first receiver’s E-mail address. NULL
Recipient E-mail Address
2
Set the second receiver’s E-mail address. NULL
Recipient E-mail Address
3
Set the third receiver’s E-mail address. NULL
Recipient E-mail Address
4
Set the fourth receiver’s E-mail address. NULL
Save Configuration Update these modifications.
Send Test E-mail
A test email can be sent to recipient to check
accuracy.
2.16 Diagnosis
EH7510 provides a Ping function, which is a simple but useful tool, for troubleshooting
network problems, (next page Fig.2.75.a, b, c, d).