Atop Technology EH7510 User manual - Manual (Page 40)

Atop Industrial Managed Ethernet Switch
EH7510
User Manual V 1.0
34
Table 2.17
Label Description
MAC address MAC address entered in this field will be blocked.
VLAN Assign VLAN ID to this static MAC address
Remove Remove this entry in filter table.
Add Add the MAC addresses to the filter table
2.7 GARP/GVRP/GMRP
This function includes three options, GARP, GVRP and GMRP.
GARP: Generic Attribute Registration Protocol, also known as Multiple Registration Protocol
(MRP). It operates at the data link layer of OSI, and it defines the architecture, rules of
operation, state machines and variables for the registration and removing of attribute values.
GARP is used by two applications: GARP VLAN Registration Protocol (GVRP), and
GARP Multicast Registration Protocol (GMRP). GVRP provides a method to share VLAN
information dynamically and configure the needed VLANs. GMRP provides a mechanism
that allows bridges and switches to register trunking information dynamically. GVRP and
GMRP are similar, and the only difference is that GVRP works with VLAN but GMPR works
with Multicast MAC address.
2.7.1 Multicast Group Table
Fig. 2.30
Table 2.18
Label Description
VID VLAN identifier.
MAC address Multicast group’s MAC address..
Static Ports
Statically joined ports through in Static MAC Table and to which
the multicast group traffic is forwarded.
GMRP Dynamic Ports
Dynamically joined ports through GMRP Application presently
on the group and to which the multicast group traffic is
forwarded.