Atop Technology EH7510 User manual - Manual (Page 58)

Atop Industrial Managed Ethernet Switch
EH7510
User Manual V 1.0
52
2.11.1 VLAN Mode
Port-Based VLAN (or Static VLAN equivalently) assignments are created by assigning
ports to a VLAN. If a device is connected to a certain port, the device will assign a VLAN to
that specific port; if users change the port connected, they must manually make a new port-
VLAN assignment for this new connection.
Steps to set up Port-Based VLAN:
1. On VLAN Mode page, select Port-Based -> Update -> Reset.
2. Select specific ports to be included to certain group.
Fig. 2.43.a ＊Default screen＊
Table 2.29
Label Description
Factory
Default
VLAN Mode
Choose either Port-Based or 802.1Q.
The switch will reboot after changing to VLAN
mode.
802.1Q