Atop Technology EH7510 User manual - Manual (Page 71)

Atop Industrial Managed Ethernet Switch
EH7510
User Manual V 1.0
65
2.13 ERPS/Ring
2.13.1 DIP Switch
Fig. 2.54
This selection allows users to set the DIP Switch control; the DIP switches are located on
EH7510 outer case, so it’s another easy and convenient way to configure ERPS or iA-ring
or Compatible-Ring via DIP Switches (instead of modifying configuration on web browser).
Fig. 2.54 shows the current DIP Switch’s status; the bottom portion allows the user to modify
settings.
Table 2.40
Label Description Factory Default
DIP Switch
Control Enables or disables ERPS/iA-Ring/Compatible-Ring
configuration via hardware DIP Switch.
Unchecked
After enabling the DIP Switch Control at DIP Switch page, users can control DIP Switch
following the mode selection below.