Atop Technology EH7510 User manual - Manual (Page 80)

Atop Industrial Managed Ethernet Switch
EH7510
User Manual V 1.0
74
Fig. 2.66
Fig. 2.66 shows iA-Ring redundancy protocol; users should disable DIP Switch Control and
ERPS first in order to enable/configure iA-Ring parameters on a web browser.
Table 2.48
Label Description Factory Default
iA-Ring Enable iA-Ring or disable iA-Ring. Disabled
Ring Master
Enabled: Master Mode.
Disabled: Slave Mode.
Disabled
1
st
Ring Port Select the primary port for the Ring. Port9
2nd Ring Port Select the backup port for the Ring. Port10