Atop Technology EH7510 User manual - Manual (Page 39)

Atop Industrial Managed Ethernet Switch
EH7510
User Manual V 1.0
33
EH7510 also supports adding static MAC address manually (Fig. 2.28); the steps are as
follows,
Step 1: Enter MAC Address. Unicast address starts with 00 and Multicast address starts
with 01.
Step 2: Specify VLAN ID.
Step 3: Decide which ports belong to its corresponding address; use Ctrl to add more than
one port.
Table 2.16
Label Description
MAC address Enter MAC address manually.
VLAN Specify VLAN ID that this static MAC belong to
Type -
Port(s) Define which ports belong to this address
Add Confirm and add the MAC address.
Remove Remove any existing MAC address.
2.6.3 Filter MAC
Fig. 2.29.a
Fig. 2.29.b ＊Example＊
This function allows users to set MAC filter manually, see Fig. 2.29.a, and Fig. 2.29.b for an
example.