Atop Technology EH7510 User manual - Manual (Page 35)

Atop Industrial Managed Ethernet Switch
EH7510
User Manual V 1.0
29
The value has to be an integer multiple of 1024 when rate is between 1792Kbps and
102400Kbps (for 100M) or 106496Kbps (for 1000M).. Ex: 2048K, 3072K … 102400Kbps.
The values have to be integer multiples of 8192 when rate is greater than 106496Kbps.
2.5 Trunking
EH7510 supports Link Trunking; it allows one or more links to be added together to form
one single but larger group. The advantage of this function gives the user more flexibility
while setting up network connections; the bandwidth of a link can be doubled or tripled. Also,
if one link is disconnected, the remaining trunked ports can share the traffic within the trunk
group; this function increases the redundancy for higher reliability.
2.5.1 LACP
LACP: IEEE standard, Link Aggregation Control Protocol.
This option shows the switch’s trunking information (Fig. 2.24); users can only specify the
system priority here. Other settings including defining a trunk group and specifying LACP
functions will be described in the next section.
`
Fig. 2.24