Atop Technology EH7510 User manual - Manual (Page 46)

Atop Industrial Managed Ethernet Switch
EH7510
User Manual V 1.0
40
Fig. 2.35.b ＊Example＊
Fig. 2.35.a, 2.35.b display current IP multicast addresses, and it allows users to add more
manually.
For example, an IP multicast group address is: 239.1.1.1; joining ports are Port1, Port2 and
Port5 with VLAN=1.
Users should key the IP in the IP Multicast Address column and click the corresponding
port ’s number in the source column. Click the “Ctrl” key on the keyboard to add more ports.
Then click on the button, the IP address is then added as it can be seen on
Fig 2.35.b, above; to remove the static IP multicast address entry setting, click the
button. These procedures are similar as when we added Uni/Multicast
MAC address previously, the only difference being that the IP multicast address has the
form 239.XX.XX.XX.