Atop Technology SW550XC User manual - Manual (Page 33)

Industrial Wireless Serial Device Server Series
SW550xC User Manual V 1.0
28
Default Settings in Infrastructure Mode:
Table 3. 1
Caption Default
SSID Null
BSSID (MAC Address) Any (unless enabled)
Topology Infrastructure
Band Mode Automatic Detection
Bandwidth
1
Automatic Detection
Channel Automatic Detection
Authentication Mode OPEN
Encryption Type NONE
Default Settings in Ad-Hoc Mode:
Table 3.2
Caption Default
SSID Null
BSSID (MAC Address) Any (unless enabled)
Topology Ad-Hoc
Band Mode 802.11b
Bandwidth
1
Automatic Detection
Channel 1
Authentication Mode OPEN
Encryption Type NONE
Secondary Channel Disabled
Authentication Mode OPEN
Encryption Type NONE
 Number: This row only shows when the Wireless Profile function is enabled. Choose
the profile that you want to configure by selecting its number.
 Enable: This row only shows when the Wireless Profile function is enabled. Only the
enabled profiles will show in the Profiles page.
 SSID: specifies the SSID (network name) that SW550xC should connect to wirelessly.
There is a “Scan Network” button to the right of the empty box, this button makes it