Atop Technology SW550XC User manual - Manual (Page 43)

Industrial Wireless Serial Device Server Series
SW550xC User Manual V 1.0
38
4.7 SNMP/ALERT Settings
The SNMP is used by network management software to monitor devices in a network to
retrieve network status information and to configure network parameters. The SNMP Settings
shows the configuration of this device so it can be viewed by third-party SNMP software as
shown below, Figure 4.20.
Figure 4.20
SW550xC provides three SNMP fields, which are “System Contact”, usually used to specify
the device’s contact information in case of emergency; “System Name”, usually used to
identify this device; and “System Location”, usually used to specify the device location.