Atop Technology SW550XC User manual - Manual (Page 52)

Industrial Wireless Serial Device Server Series
SW550xC User Manual V 1.0
47
4.10.3 Firmware Upgrade
Updated firmware is provided by our company from time to time (for more information visit our
News & Events webpage), to fix bugs and optimize performance. It is very important that the
device must NOT be turned off or powered off during the firmware upgrading, (please be
patient as this whole process might take up to 7 minutes). Before upgrading the firmware,
please make sure that the device has a reliable power source that will not be powered off or
restarted during the upgrading process. To upgrade a new firmware, once downloaded, copy
the new firmware file to your computer, and then click “Browse” to find the new firmware file
as shown in Figure 4.28, then click “Upload”. The program will show the upload status,
please wait until the uploading process is finished (the amount of time varies depending on the
equipment used); the device will then proceed to restart itself.
Figure 4.28
Note: if the firmware upgrade process fails and the device becomes unreachable, follow the
TFTP Recovery procedure on the Appendix .