Atop Technology SW550XC User manual - Manual (Page 87)

Industrial Wireless Serial Device Server Series
SW550xC User Manual V 1.0
82
5.3.4 Wi-fi Direct Group Owner Mode
For SW550xC quick steps to work as in Wi-Fi Direct Group Owner mode, the procedure is as
follows:
1. Enable Wi-Fi Direct on your SW550xC. There are two ways to switch your SW550xC to
Wi-Fi Direct Group Owner.
 Press and hold the button(on the side of the housing) four seconds to trigger SW550xC
switch to Wi-Fi Direct Group Owner mode.
 Enable Wi-Fi Direct Group Owner from Web.
Figure 5.27
2. Active Wi-Fi Direct or WPS PBC on your wireless client, your station will try to connect to
Wi-Fi Direct GO automatically.
When another station want to join the Wi-Fi group.
Original: Press and hold Wi-Fi Direct Group Onwer's WPS button one second to trigger WPS
PBC or click the Start WPS PBC software button on Web.
Modified: Press and hold P2P Button(on the side of the housing) one second to trigger WPS
PBC or click the Start WPS PBC software button on Web.
Note:
Reboot or apply settings on Web GUI will break Wi-Fi Direct Group.
Profiles will disable if Wi-Fi Direct enabled.
Press and hold the button eight seconds can destroy Wi-Fi Direct Group Owner mode,
SW550xC will switch to AP Client mode when you use the P2P button.