Atop Technology SW550XC User manual - Manual (Page 99)

Industrial Wireless Serial Device Server Series
SW550xC User Manual V 1.0
94
After at least one Virtual COM port is selected, the Control Panel will show, Figure 6.7
Figure 6.7
The left hand side of the Control Panel shows the list of selected Virtual COM ports. Click on
Select Ports to add or remove Virtual COM ports from the list. The right hand side of the
Control Panel shows the configurations of the selected Virtual COM port marked in blue. Each
Virtual COM port can have its own settings.
Note: The changes to Virtual COM ports apply immediately, so there is no need to save the
settings manually. However, if the Virtual COM port is already in use, it is necessary to close
the Virtual COM port and open it after the TCP connection closes completely in order for the
changes to take effect.