Atop Technology SW550XC User manual - Manual (Page 70)

Industrial Wireless Serial Device Server Series
SW550xC User Manual V 1.0
65
5.2.6 TCP Client Application: Configure SW550xC as a Pair
Connection Slave
A Pair Connection Slave, is shown in Figure 5.14; it is necessary to pair up with a Pair
Connection Master. Please setup a Pair Connection Master first before proceeding.
Figure 5.14
 Follow Sec. 5.1.2 to configure SW550xC in TCP Client mode properly.
 Click on the dropdown box of the Application option and switch to “Pair Connection
Slave ” to enabled Pair Connection application in SW550xC.
 Match the Destination IP with the settings of Pair Connection Master’s IP that was
setup previously.
 Scroll to the bottom of the page and click on “Save & Apply” button to save the
changes.