Atop Technology SW550XC User manual - Manual (Page 71)

Industrial Wireless Serial Device Server Series
SW550xC User Manual V 1.0
66
5.2.7 TCP Server Application: Enable Reverse Telnet
Reverse Telnet is useful if a telnet program is used to connect to SW550xC and the serial
interface of the SW550xC is connected to a Terminal Server. Telnet programs in
Windows/Linux require special handshaking to get the outputs and formatting show properly.
SW550xC will interact with those special commands (CR/LF commands) if Reverse Telnet is
enabled.
Figure 5.15
 Follow Sec 5.1.1 to configure SW550xC in TCP Server mode properly.
 Click on the dropdown box of the Application option and switch to “Reverse Telnet”
to enabled telnet application in SW550xC.
 Scroll to the bottom of the page and click on “Save & Apply” button to save the
changes.