Atop Technology SW550XC User manual - Manual (Page 97)

Industrial Wireless Serial Device Server Series
SW550xC User Manual V 1.0
92
6.2 Enable VCOM Serial device servers and select
VCOM in Windows
6.2.1 Enable VCOM in Serial device servers
Enable Virtual COM in our serial device servers by logging into our WebUI. It is located under
COM configuration. The following figures show how to enable Virtual COM in SW550xC. For
a detailed Link Mode configuration with Virtual COM, please refer to the previous chapter
starting from Sec. 5.1 on Link Mode configurations.
Figure 6.4