CHAMPION 54 DR Series-90DRHDPW Manual - Manual (Page 166)

158
The following pages illustrate the operational states of the circuit board during the operation
of the various dishwasher models.
All Models Current State:
1. Main Power is on.
2. Dishwasher power switch is off.
3. All LED’s off.
NOTE:
A flashing Run Light at any time indicates that the machine filled for more than 20 minutes.
Check the machine drains and fill circuits.
Correct the situation then turn the dishwasher power switch off and back on.
Remove any dish racks in the machine for reprocessing and resume normal operation.
This RUN LED
Only Indicates that the
Board has Power.
Circuit Board Diagnostics