CHAMPION 54 DR Series-90DRHDPW Manual - Manual (Page 32)

24
E-Rack Digital Temperature Display Meters
ATTENTION:
The Digital Temperature Displays only indicate temperature, they do not control wash tank or final rinse
booster heaters. Electro-mechanical thermostats continue to control the tank and final rinse heat
circuits.
1. The analog temperature gauges have been replaced with digital temperature display meters.
2. The meters display temperatures for the prewash tank (if equipped), the wash tank,
power rinse tank (if equipped), the DR dual rinse tank (if equipped), and the final rinse.
3. A meter displays temperature in 2 ways:
a. The first display is a semi-circular LED bar that moves from left to right; as the temperature
increases in magnitude. The color of the bar changes from black, to orange, and to green.
b. The second display is a 3 digit LED that changes from OFF if the tank or final rinse heat is
disabled, to Blank and from a minimum temperature of 70
o
F to the maximum calibrated
temperature set point of the meter.
(Refer to the "Display Meter Operation Checks" on the next page to change a Meter set-point.)
Control cabinet showing digital temperature display meters on the right-hand side of the control cabinet.
3 digit
LED
LED Bar
Close-up view of the display meters. Note the semi-circular indicator bars
and the numeric read-outs in the center.
Digital Display