CHAMPION 54 DR Series-90DRHDPW Manual - Manual (Page 174)

166
1.
Power and Pause LEDs are on.
Drive Jam Switch is closed (NC) LED is on.
Table Limit Switch is closed (NC) LED is on.
Final Rinse Trip Switch is closed (NC) LED is on.
Rack Trip Switch is closed (NC) LED is on.
(no rack present)
Run Light LED is on.
Green light on front of control panel is on.
The Pumps LED is on. 2.
A door is opened during the wash cycle.
The Pause LED goes out. 3.
The Run Light LED remains on. 4.
The Pumps LED goes out.
(All pumps and drive stop.) 5.
When the door is opened, all Heat,
Fill, Final Rinse, Rinse Aid, DR Pump LEDs go out.
(Heat circuits, fill circuits are de-energized.) 6.
If door is closed before 5 minutes has elapsed
the machine will resume operation automatically
and all LEDs will return to their normal states. 7.
If the door remains open for more than 5 minutes
the machine must be restarted. 8.
To restart the wash cycle, press the Start button and
insert a dish rack into the machine to activate the
Rack Trip Switch. The Start LED comes on and then goes out,
the Run Light LED comes on, the Pumps LED comes on.
The machine begins another 90 second cycle. Current State 6: DOOR SWITCH OPERATION Dishwasher power switch is on. Machine is full of water. Machine is washing.