CHAMPION 54 DR Series-90DRHDPW Manual - Manual (Page 176)

168
1.
Power and Pause LEDs are on.
Drive Jam Switch is closed (NC) LED is on.
Table Limit Switch is closed (NC) LED is on.
Final Rinse Trip Switch is closed (NC) LED is on.
Rack Trip Switch is closed (NC) LED is on.
(no rack present)
Run Light LED is on.
Green light on front of control panel is on.
The Pumps LED is on. 2.
Turn machine power switch off. 3.
All LEDs go out. 4.
Run LED goes out indicating the control board
no longer has power. Current State 8: SHUTDOWN Dishwasher power switch is on. Machine is full of water. Machine is washing.