ETC Echo Architectural Control Processor (ACP) v1.0.0 - Manual (Page 6)

1 Echo ACP Configuration Manual
Introduction
Welcome to the Echo Architectural Control Processor (E-ACP) Configuration Manual. This
manual contains information for user configuration and programming of the Echo ACP.
The Echo ACP installs into a Unison DRd enclosure and provides centralized access to the
dimming, switching, rack enclosure settings, DMX setup, and interface to Echo controls
stations over the EchoConnect control network.
The Echo ACP serves as the real time processor for incoming control signals from other
Echo processors, control stations, and control sources including DMX (input) and sACN (up
to four sACN universes), and transmits that information to the individual dimmers, relays
and control stations.
An optional Echo Station Power Module (E-SPM) fits in the module slot directly above the
Echo ACP and provides power for up to 16 Echo control stations on the topology-free
EchoConnect control network. Reference the related Echo Station Power Module Install
Guide for details.