ETC Echo Architectural Control Processor (ACP) v1.0.0 - Manual (Page 72)

67 Echo ACP Configuration Manual
HELV5 240V AC 5 amp reverse phase module electronic low voltage loads
HR15
240V AC 15 amp, level activated mechanical
relay
any switched load
HD15F 240V AC 15 amp fluorescent dimmer module
3 wire dimmable electronic
fluorescent ballast
277V AC Racks
Module Type Description of Purpose Compatible Loads
AFM required in empty dimmer slots not applicable
ACC15 and ACC20
direct connection from line lug to load lugs
protected by 15 or 20 amp circuit breaker constant loads such as power
supplies or other constant-on loads
AD15 and AD20
standard 15 or 20 amp dimmer
enhanced dimmer with 500
s rise time
Incandescent, 2 and 4 wire
fluorescent, magnetic low voltage,
neon, cold cathode (CC) and non-
dim
AD15F and AD20F 15 and 20 amp fluorescent dimmer
3 wire dimmable electronic
fluorescent ballast / 2 wire ballast
with battery pack
AD15B and AD20FB
15 and 20 amp fluorescent dimmers with
integrated battery. 2 wire dimmable electronic
fluorescent ballast with battery pack
AR15 and AR20 15 or 20 amp, level activated mechanical relay any switched load
AELV5 5 amp reverse phase module electronic low voltage loads
AL5 5 amp, low wattage dimmer
2 wire dimmable fluorescent and
LED
AL5F 5 amp fluorescent low wattage dimmer
3 wire dimmable fluorescent and
LED
230 and 240V AC Racks (Continued)
Module Type Description Compatible Loads