ETC Echo Architectural Control Processor (ACP) v1.0.0 - Manual (Page 79)

B
Echo ACP Web Interface 74
Appendix B
Echo ACP Web Interface
The Echo ACP features a web interface that is accessible over the system network using
any internet browser (such as Internet Explorer®, Firefox™, Safari®, or Chrome®). This
interface allows you to view the system status, perform basic panel functions, update
firmware, and upload or download the rack configuration.
Access the Web Interface
To access your Echo Relay Panel over the network:
Step 1: Connect a computer with an internet browser to the same Ethernet network as
the Echo ACP. The Echo ACP is enabled for Ethernet connection when a
Left I/O option card is installed and connected to the network. See “Left I/O” on
page 6.
Step 2: Using the internet browser, connect to the Echo ACP by entering the Echo ACP
IP address into the url address field. The default IP address for Echo ACPs is
10.101.166.101. If your system uses dynamically assigned addresses (DHCP),
your address will be assigned from the system server. Locate the IP address on
the Arch Control Status Display . The ETC Echo ACP web interface displays.
The web user interface home page menu provides access to the six available pages of the
interface including: System, Dimmers, Set Levels, Presets, Sequences, and Files.
System
The “System” page provides read only information listing the following:
• all software version information that is also visible from the Version Info menu in the
Echo ACP