EUCHNER AS-i 3.0 PROFIBUS Gateway with integrated Safety Monitor for 2 AS-i circuits - Manual (Page 150)

150 Subject to reasonable modifications due to technical advances Id.-No.: 103329 Issue date - 24.10.2008 EUCHNER GmbH + Co. KG
Kohlhammerstraße 16 • D-70771 Leinfelden-Echterdingen Tel. +49/711/75 97-0 • Fax. +49/711/753316
AS-i 3.0 PROFIBUS Gateway with integrated Safety Monitor
Appendix: Example for startup on a Siemens S7
The bit rate for the PROFIBUS can be set in the window "Properties PROFI-
BUS"
Š "Network settings" Š "Transmission rate".
If special adjustments are needed, you can adjust the PROFIBUS parameters us-
ing the profile "Properties PROFIBUS"
Š "Network settings" Š "Profile" Š
"User defined".
17.2.2 Insert AS-i 3.0 PROFIBUS Gateway with integrated Safety Monitor
Once the SIMATIC hardware has been added to the hardware configuration and
the PROFIBUS configured, you can add the AS-i 3.0 PROFIBUS Gateway with
integrated Safety Monitor to the project.
After successfully installing the GSD file "EUCH1746.gsd" you will find the AS-i
3.0 PROFIBUS Gateway with integrated Safety Monitor in the hardware catalog
under PROFIBUS/Other FIELD DEVICES/Gateway/AS-i.