EUCHNER AS-i 3.0 PROFIBUS Gateway with integrated Safety Monitor for 2 AS-i circuits - Manual (Page 152)

152 Subject to reasonable modifications due to technical advances Id.-No.: 103329 Issue date - 24.10.2008 EUCHNER GmbH + Co. KG
Kohlhammerstraße 16 • D-70771 Leinfelden-Echterdingen Tel. +49/711/75 97-0 • Fax. +49/711/753316
AS-i 3.0 PROFIBUS Gateway with integrated Safety Monitor
Appendix: Example for startup on a Siemens S7
In addition to sending the AS-i slave digital data, a communication interface mod-
ule can be added. The communication interface is used for sending specific com-
mands to the AS-i 3.0 PROFIBUS Gateway with integrated Safety Monitor. More
details about this can be found in chap. 9.
In order to send the analog values for AS-i slaves directly, the modules can be
used with the keyword "Analog". The value in parentheses indicates which ad-
dress range is to be used for the AS-i Analog slaves.
For modules "nn Byte Analog In (n Sl.)" and "nn Byte Analog Out (n Sl.)" the AS-i
address of the analog slave can be freely selected.
When adding the AS-i 3.0 PROFIBUS Gateway with integrated Safety Monitor
"EUCHNER GMO-PR-1D-C02" using drag and drop the dialog for assigning the
PROFIBUS slave address is shown. The factory default setting for the AS-i 3.0
PROFIBUS Gateway with integrated Safety Monitor is Address 3.